DI_a024 — Hold N For Neutral
Full alert identifier: DI_a024_holdNForNeutral
Message shown in the car
Hold N for Neutral Hold gear stalk in first detent to enter Neutral
Alert description
This alert tells the user how to enter Neutral (N) when the drive interface (DI) electronic control unit (ECU) detects that the stalk is in N position for less than the required time of 1 second, causing a N drive mode request to not complete. The user must hold the stalk in the first detent to enter N.
Potential impact
No impact on vehicle function. This alert is intended to help the user enter N. User may be experiencing difficulty entering Neutral when the alert is set.
Set condition
Stalk is detected in N position (first detent) for less than 1 second, causing a Neutral (N) drive mode request to not complete.
Clear condition
None. This alert clears automatically after 5 seconds.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Pedal Pos
DI_
|
% |
| Signal | Unit |
|---|---|
Brake Pressed
DI_
|
— |
Current Gear
DI_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DI_a024.