RCM_a017 — Pass AB Stage2
Full alert identifier: RCM_a017_passABStage2
Message shown in the car
Front passenger safety restraint system issue Service is required
Alert description
RCM_a017_passABStage2
Potential impact
The restraint system may not function as designed.
Set condition
There is a fault with the second stage of the passenger airbag.
Clear condition
The fault is rectified.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Event Accel Pedal Pos
RCM_
|
% |
Event Steering Angle
RCM_
|
deg |
Event Vehicle Speed
RCM_
|
kph |
| Signal | Unit |
|---|---|
Event Arm Status
RCM_
|
— |
Event Diag Enabled
RCM_
|
— |
Event Drive Orientation
RCM_
|
— |
Event Driver Brake Apply
RCM_
|
— |
Event Factory Mode
RCM_
|
— |
Event Front Left Seatbelt
RCM_
|
— |
Event Front Right Seatbelt
RCM_
|
— |
Event ID Fsignal
RCM_
|
— |
Show 6 more fields
| Signal | Unit |
|---|---|
Pass AB Stg 2 Config
RCM_
|
— |
Pass AB Stg 2 Cross Coup
RCM_
|
— |
Pass AB Stg 2 Open
RCM_
|
— |
Pass AB Stg 2 Short
RCM_
|
— |
Pass AB Stg 2 Sht 2 Bat
RCM_
|
— |
Pass AB Stg 2 Sht 2 Gnd
RCM_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of RCM_a017.