RCM_a029 — Driver AB Active Vent
Full alert identifier: RCM_a029_driverABActiveVent
Message shown in the car
Safety restraint system issue Service is required
Alert description
RCM_a029_driverABActiveVent
Potential impact
The restraint system may not function as designed.
Set condition
There is a fault with the driver active vent.
Clear condition
The fault is rectified.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Event Accel Pedal Pos
RCM_
|
% |
Event Steering Angle
RCM_
|
deg |
Event Vehicle Speed
RCM_
|
kph |
| Signal | Unit |
|---|---|
Driver ABAV Config
RCM_
|
— |
Driver ABAV Cross Coup
RCM_
|
— |
Driver ABAV Open
RCM_
|
— |
Driver ABAV Short
RCM_
|
— |
Driver ABAV Sht 2 Bat
RCM_
|
— |
Driver ABAV Sht 2 Gnd
RCM_
|
— |
Event Arm Status
RCM_
|
— |
Event Diag Enabled
RCM_
|
— |
Show 6 more fields
| Signal | Unit |
|---|---|
Event Drive Orientation
RCM_
|
— |
Event Driver Brake Apply
RCM_
|
— |
Event Factory Mode
RCM_
|
— |
Event Front Left Seatbelt
RCM_
|
— |
Event Front Right Seatbelt
RCM_
|
— |
Event ID Fsignal
RCM_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of RCM_a029.