APP_w194 — Acc Driver Resume Rqrd

Full alert identifier: APP_w194_accDriverResumeRqrd

Message shown in the car

Press accelerator pedal to resume cruise control

Alert description

While Traffic-Aware Cruise Control (TACC) is enabled, the driver stops the vehicle. TACC enters a HOLD state and requires driver input before resuming. This alert is primarily informational.

Potential impact

This alert is primarily informational and is used for logging purposes.

Set condition

The driver stops the vehicle while TACC is enabled.

Clear condition

The driver resumes driving by pressing the accelerator or pushing the gear stalk down.

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of APP_w194.

APP_w004 — Acc Disabled APP_w004_accDisabled The Autopilot electronic control unit (ECU) has detected a condition on the vehicle which limits Traffic-Aware Cruise Control (TACC) feature availability.
APP_w216 — Driver Overriding APP_w216_driverOverriding The driver overrides the Traffic-Aware Cruise Control (TACC) feature by using the accelerator pedal. This results in Autopilot not applying the brakes, favoring the driver's input instead.
APP_w356 — Driver Overriding APP_w356_driverOverriding The driver overrides the Traffic-Aware Cruise Control (TACC) feature by using the accelerator pedal. This results in Autopilot not applying the brakes, favoring the driver's input instead.
APP_w221 — Acc Radar Blind APP_w221_accRadarBlind The radar sensor has inadequate visibility and is blind or blocked, which may cause Traffic-Aware Cruise Control (TACC) functionality to be limited or unavailable.
APP_w222 — Acc Camera Blind APP_w222_accCameraBlind One or more cameras has inadequate visibility and is blind or blocked, which may cause Traffic-Aware Cruise Control (TACC) functionality to be limited or unavailable.

Browse all APP alert codes