BMS_f002 — HW Over Voltage
Full alert identifier: BMS_f002_HW_Over_Voltage
Message shown in the car
Service is required PULL OVER SAFELY
Alert description
The battery management system (BMS) has detected that the pack voltage is too high.
Potential impact
Inability to charge, drive, or support the low voltage (LV) system
Set condition
The BMS detects that pack voltage is above the acceptable threshold.
Clear condition
The BMS detects that the pack voltage is within the acceptable threshold.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Pack Current
BMS_
|
A |
Pack Voltage
BMS_
|
V |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of BMS_f002.