BMS_f003 — HW Module Alarm
Full alert identifier: BMS_f003_HW_Module_Alarm
Message shown in the car
Service is required PULL OVER SAFELY
Alert description
The battery management system (BMS) has detected that one or more of the battery modules has reported an alert. This alert may be set falsely at extremely low LV battery voltages.
Potential impact
Inability to charge, drive, or support the low voltage (LV) system
Set condition
The BMS detects that one or more of the battery modules is reporting an alert.
Clear condition
The BMS detects that none of the battery modules are reporting an alert.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
Bmb 6 V
BMS_
|
V |
Max Brick V
BMS_
|
V |
Min Brick V
BMS_
|
V |
Pack Current
BMS_
|
A |
Vehicle 12 V
BMS_
|
V |
| Signal | Unit |
|---|---|
Bmb Power On
BMS_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of BMS_f003.