CHGS_u010 — Bad Charge Cable

Full alert identifier: CHGS_u010_BadChargeCable

Alert description

CHGS_u010_BadChargeCable

This information is not available in the alert reference.

This information is not available in the alert reference.

This information is not available in the alert reference.

These diagnostic fields are associated with CHGS_u010. Check the alert's Payload in Service Mode Plus for available values.

Signal	Unit
EVSE Accept `CHGS_u010_EVSEAccept`	—
FC Contactor State `CHGS_u010_FCContactorState` 0 OPEN 1 CLOSED 2 WELDED 3 STATIC TEST PASSED 4 INIT 7 SNA	—
FC Dynamic Test Result `CHGS_u010_FCDynamicTestResult` 0 SNA 1 PENDING 2 PASSED 3 FAILED	—
FC Static Test Result `CHGS_u010_FCStaticTestResult` 0 SNA 1 PENDING 2 PASSED 3 FAILED	—
Line 2 Is AC `CHGS_u010_Line2IsAC`	—
Line Is AC `CHGS_u010_LineIsAC`	—
Line 2 Voltage `CHGS_u010_line2Voltage`	V
Line Freq `CHGS_u010_lineFreq`	Hz

Show 7 more fields

Signal	Unit
Line Voltage `CHGS_u010_lineVoltage`	V
Phase 1 Has AC `CHGS_u010_phase1HasAC`	—
Phase 2 Has AC `CHGS_u010_phase2HasAC`	—
Phase 3 Has AC `CHGS_u010_phase3HasAC`	—
Pilot `CHGS_u010_pilot` 0 NONE 1 FAULTED 2 LINE CHARGE 3 FAST CHARGE 4 IDLE 5 INVALID 6 UNUSED 6 7 SNA	—
Proximity `CHGS_u010_proximity` 0 SNA 1 DISCONNECTED 2 UNLATCHED 3 LATCHED	—
V Bat `CHGS_u010_vBat`	V

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of CHGS_u010.