Skip to content

DAS_w012 — Cam Boot Failure

Full alert identifier: DAS_w012_Cam_BootFailure

Alert description

DAS_w012_Cam_BootFailure

Potential impact

This information is not available in the alert reference.

Set condition

This information is not available in the alert reference.

Clear condition

This information is not available in the alert reference.

Signals to check

These diagnostic fields are associated with DAS_w012. Check the alert's Payload in Service Mode Plus for available values.

Signal Unit
Boot DDR Temp Status DAS_sw012_bootDDRTempStatus
0
SDRAM low temperatue
1
temperature less or equal to 85 C
2
temperature grater than 85 C
3
SDRAM high temperature
 —
Boot Test Results DAS_sw012_bootTestResults —
Freescale Temp DAS_sw012_freescaleTemp degC
Mesp DDR Temp Status DAS_sw012_mespDDRTempStatus
0
Temperature ok
1
Temperature below spec
2
Termperature above spec
3
Temperature above 85
7
Temperature error
 —
Mesp Fatal Err Code DAS_sw012_mespFatalErrCode —
Mesp Fatal Err Details DAS_sw012_mespFatalErrDetails —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DAS_w012.

Related DAS alerts

Browse all DAS alert codes