Skip to content

DIS_f136 — Spi Error

Full alert identifier: DIS_f136_spiError

Message shown in the car

Front motor disabled - OK to drive Vehicle power may be limited

Alert description

Drive Inverter Slave Fault: SPI communication error

Potential impact

This information is not available in the alert reference.

Set condition

This information is not available in the alert reference.

Clear condition

This information is not available in the alert reference.

Signals to check

These diagnostic fields are associated with DIS_f136. Check the alert's Payload in Service Mode Plus for available values.

Signal Unit
Busy Error AH DIS_a136_busyError_AH —
Busy Error AL DIS_a136_busyError_AL —
Busy Error BH DIS_a136_busyError_BH —
Busy Error BL DIS_a136_busyError_BL —
Busy Error CH DIS_a136_busyError_CH —
Busy Error CL DIS_a136_busyError_CL —
Crc Error AH DIS_a136_crcError_AH —
Crc Error AL DIS_a136_crcError_AL —
Show 10 more fields
Signal Unit
Crc Error BH DIS_a136_crcError_BH —
Crc Error BL DIS_a136_crcError_BL —
Crc Error CH DIS_a136_crcError_CH —
Crc Error CL DIS_a136_crcError_CL —
Spi Error AH DIS_a136_spiError_AH —
Spi Error AL DIS_a136_spiError_AL —
Spi Error BH DIS_a136_spiError_BH —
Spi Error BL DIS_a136_spiError_BL —
Spi Error CH DIS_a136_spiError_CH —
Spi Error CL DIS_a136_spiError_CL —

Check other alerts

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DIS_f136.

Browse all DIS alert codes