DI_f170 — Rear Oil Pump Diagnostics

Full alert identifier: DI_f170_rearOilPumpDiagnostics

Message shown in the car

Unable to drive PULL OVER SAFELY

Drive Inverter Fault: Rear oil pump diagnostic data

This information is not available in the alert reference.

This information is not available in the alert reference.

This information is not available in the alert reference.

These diagnostic fields are associated with DI_f170. Check the alert's Payload in Service Mode Plus for available values.

Signal	Unit
Dc Voltage `DI_a170_dcVoltage` 255 SNA	V
Low Press Plausibility `DI_a170_lowPressPlausibility`	%
Oil Flow `DI_a170_oilFlow` 255 SNA	LPM
Oil Pump Alert `DI_a170_oilPumpAlert`	—
Oil Temperature `DI_a170_oilTemperature` 255 SNA	DegC
Phase Current `DI_a170_phaseCurrent` 255 SNA	A
Reason `DI_a170_reason` 0 NONE 1 OPC ALERT 2 PRESS 6LPM OK 3 PRESS 9LPM OK 4 PRESS LOW 5 PRESS HIGH	—
State `DI_a170_state` 0 STANDBY 1 ENABLE 2 COLD STARTUP 6 FAULTED 7 SNA	—

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of DI_f170.