EPB_w128 — Followed Di To Park

Full alert identifier: EPB_w128_followedDiToPark

Alert description

EPB_w128_followedDiToPark

This information is not available in the alert reference.

This information is not available in the alert reference.

This information is not available in the alert reference.

These diagnostic fields are associated with EPB_w128. Check the alert's Payload in Service Mode Plus for available values.

Signal	Unit
D Igear `EPB_a128_DIgear` 0 INVALID 1 P 2 R 3 N 4 D 7 SNA	—
EP Bpending State `EPB_a128_EPBpendingState` 0 OPEN 1 DYNAMIC 2 PARK 3 HANDBRAKE 4 START 5 SERVICE 6 SELFPARK 7 SNA	—
EP Breq State `EPB_a128_EPBreqState` 0 OPEN 1 DYNAMIC 2 PARK 3 HANDBRAKE 4 START 5 SERVICE 6 SELFPARK 7 SNA	—
EP Bstate `EPB_a128_EPBstate` 0 OPEN 1 DYNAMIC 2 PARK 3 HANDBRAKE 4 START 5 SERVICE 6 SELFPARK 7 SNA	—
EP Bsubstate L `EPB_a128_EPBsubstateL` 0 STATIONARY 1 APPLYING 2 RELEASING 3 FAULT 4 CLR FAULT	—
EP Bsubstate R `EPB_a128_EPBsubstateR` 0 STATIONARY 1 APPLYING 2 RELEASING 3 FAULT 4 CLR FAULT	—

With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of EPB_w128.