Common/tasks/PING_DAS_X_ETHERNET-PING-DAS-ECUS
The Ethernet pings Ape-A, Ape-B, or both. After a reply is received, five pings are sent and the full ping output is returned. Make sure to turn on the accessory drive rail. The estimated time to complete is one second per ping line output.
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
ape_a · Bool
Default: true
ape_b · Bool
ON AP4 vehicles, APE-B will not wake (will not send response to this ping) if Autosteer is disabled.
Default: true
ape_a · Bool
Default: true
ape_b · Bool
ON AP4 vehicles, APE-B will not wake (will not send response to this ping) if Autosteer is disabled.
Default: true
ape_a · Bool
Default: true
ape_b · Bool
ON AP4 vehicles, APE-B will not wake (will not send response to this ping) if Autosteer is disabled.
Default: true
ape_a · Bool
Default: true
ape_b · Bool
ON AP4 vehicles, APE-B will not wake (will not send response to this ping) if Autosteer is disabled.
Default: true
Tests the electrical connection of the backup camera controlled by the Drivers Assistance System (DAS) Electronic Control Unit (ECU).
PING-HTTP_DAS_X_BACKUP-CAMERA
Tests connection to the backup camera and performs camera firmware update.
PING-HTTP_DAS_X_BACKUP-CAMERA-SCRIPT
Camera Fan Test
PING-HTTP_DAS_X_CAMERA-FAN-SCRIPT
Performs an image capture while the Autopilot Electronic Control Unit (ECU) is in Calibration Mode. The estimated time to complete is two minutes.
PROC_DAS_X_CAPTURE-IMAGE