Skip to content
Service procedures

TAS Assisted Inflate Component

Common/tasks/PROC_TAS_X_ASSISTED-INFLATE

Model S / X (legacy)Model S / X (2021+)

What this task does

The procedure assists the inflation of a component on a Tesla Air Suspension (TAS) vehicle.

Vehicle compatibility

Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.

Model S / X (legacy) Legacy infotainment
Vehicle coverage
Pre-2021 Model S, Pre-2021 Model X
Supported connection
Local connection
Vehicle state
Stationary · Parked
Gateway diagnostic level
DiagLinkActive, Factory, Service

Procedure notes

To run the procedure, a nitrogen tank with pressure set to 8 bar(a) / 116 psi(a) must be connected to inflate springs. A nitrogen tank with pressure set to 20 bar(a) / 290 psi(a) must be connected to inflate the reservoir. While running, the air suspension might physically move.

Task inputs (1)

Action_Target

ActionTarget · String

Targeted Component

Default: FL

Options: FL, FR, RL, RR, FRONT_AXLE, REAR_AXLE, RESERVOIR, SPRINGS

Model S / X (2021+) AMD
Vehicle coverage
2021+ Model S, 2021+ Model X
Supported connection
Local connection
Vehicle state
Stationary · Parked
Gateway diagnostic level
DiagLinkActive, Factory, Service

Procedure notes

To run the procedure, a nitrogen tank with pressure set to 8 bar(a) / 116 psi(a) must be connected to inflate springs. A nitrogen tank with pressure set to 20 bar(a) / 290 psi(a) must be connected to inflate the reservoir. While running, the air suspension might physically move.

Task inputs (1)

Action_Target

ActionTarget · String

Targeted Component

Default: FL

Options: FL, FR, RL, RR, FRONT_AXLE, REAR_AXLE, RESERVOIR, SPRINGS

Related service tasks

Browse all tasks →
Communication checks

Air Suspension Chassis CAN Communication

Tests communication with the Air Suspension Chassis (TAS) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).

PING-TP_TAS

Model S / X (2021+)
Service procedures

Air Suspension Pressure Measurement

Measures the air pressure of the Tesla Air Suspension (TAS) system.

PROC_TAS_X_MEASURE-AIR-SUSPENSION-PRESSURE

Model S / X (legacy) Model S / X (2021+)
Service procedures

Calibrate Air Suspension

Calibrate the ride height of the Tesla Air Suspension (TAS).

PROC_TAS_X_CALIBRATE-RIDE-HEIGHT-PACK

Model S / X (2021+)
Service procedures

Check TAS Run Mode.

Check Tesla Air Suspension (TAS) Electronic Control Unit (ECU) mode.

PROC_TAS_X_CHECK-RUN-MODE

Model 3 / Y Model S / X (legacy) Model S / X (2021+)