Service procedures
All Window Command Position
Move all windows to a specified position.
PROC_VC_X_ALL-COMMAND-WINDOW-POSITION
Model 3 / Y
Model S / X (2021+)
Actuate Thermal Components
Coriander/tasks/PROC_VC_X_ACTUATE-THERMAL-COMPONENTS
What this task does
Set Thermal components to target positions for one minute or sweep them twice between end points. The routine will complete when all components have reached their target positions. Until then, other components will remain at their target positions or continue sweeping. Unselected components will default to a target position that minimizes noise, vibration, and harshness (NVH).
Vehicle compatibility
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
Model S / X (2021+) AMD
- Vehicle coverage
- 2021+ Model S, 2021+ Model X
- Supported connection
- Local connection
- Vehicle state
- Stationary · Neutral; Stationary · Parked
- Gateway diagnostic level
- Service, Factory, DiagLinkActive
Procedure notes
Actuators are moved and motors are enabled during this routine, ensure components are not blocked or broken.
Task inputs (14)
Sweep Louver
sweep_louver · Bool
Actuates the louver from open to close, and back. (2x)
Default: false
Target Louver
set_target_louver · Int
Set louver intake position (0:Closed 100:Open) (-1 not specified)
Default: -1
Sweep Radiator Fan
sweep_radiator_fan · Bool
Ramps up the radiator fan from minimum to maximum, and back. (2x)
Default: false
Target Radiator Fan
set_target_radiator_fan · Int
Set target RPM (850:Min 2500:Max) (-1 not specified)
Default: -1
Sweep Blower
sweep_blower · Bool
Ramps up the blower from minimum to maximum, and back. (2x)
Default: false
Target Blower
set_target_blower · Int
Set target RPM (950:Min 3500:Max) (-1 not specified)
Default: -1
Sweep Battery Pump
sweep_batt_pump · Bool
Ramps up the battery pump from minimum to maximum, and back. (2x)
Default: false
Target Battery Pump
set_target_batt_pump · Int
Set target RPM (1700:Min 6000:Max) (-1 not specified)
Default: -1
Sweep Powertrain Pump
sweep_pt_pump · Bool
Ramps up the Powertrain pump from minimum to maximum, and back. (2x)
Default: false
Target Powertrain Pump
set_target_pt_pump · Int
Set target RPM (1700:Min 6000:Max) (-1 not specified)
Default: -1
Sweep Chiller Pump
sweep_chiller_pump · Bool
Ramps up the chiller pump from minimum to maximum, and back. (2x)
Default: false
Target Chiller Pump
set_target_chiller_pump · Int
Set target RPM (1700:Min 6000:Max) (-1 not specified)
Default: -1
Sweep Radiator Pump
sweep_radiator_pump · Bool
Ramps up the Powertrain pump from minimum to maximum, and back. (2x)
Default: false
Target Radiator Pump
set_target_radiator_pump · Int
Set target RPM (1700:Min 6000:Max) (-1 not specified)
Default: -1
Related service tasks
Browse all tasks →
Self-tests
Blind Spot Indicator LED Connectivity Check
Tests connection and harness of both left and right blind spot indicator lights.
TEST-SELF_VC_X_BLIND-SPOT-LED
Model 3 / Y
Model S / X (2021+)
Service procedures
Learn New LV Battery
Run this routine after replacing the Li-Ion Low Voltage (LV) battery. Checks the fitted battery variant, adjusts vehicle configurations to the fitted variant type, and resets the required controllers and battery data.
PROC_VC_X_POST-LI-ION-LV-BATTERY-REPLACEMENT
Model 3 / Y
Model S / X (2021+)
Service procedures
Reset Radiator UA Index
Resets Radiator UA index, also known as the "Radiator Health Score" score, back to 100% - only run this routine after performing a radiator cleaning procedure.
PROC_VC_X_RESET-RADIATOR-UA-INDEX
Model 3 / Y
Model S / X (2021+)