Skip to content
Self-tests

Left Second Row Airwave Self-Test

Coriander/tasks/TEST-SELF_VCLEFT_X_AIRWAVE-SECOND-ROW-LEFT

Model S / X (2021+)

What this task does

Tests the left second row HVAC airwave vertical and lateral vent actuators. This routine detects whether each actuator is connected and calibrated. Each actuator's end- stop and zero-stop voltage and forward and reverse encoder values will be output.

Vehicle compatibility

Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.

Model S / X (2021+) AMD
Vehicle coverage
2021+ Model S, 2021+ Model X
Supported connection
Local connection
Vehicle state
Stationary · Drive; Stationary · Neutral; Stationary · Parked; Stationary · Reverse
Gateway diagnostic level
No specific level listed

Task inputs (0)

This task has no listed user inputs.

Related service tasks

Browse all tasks →
Self-tests

2R Left Recline and Center Armrest Console Self-Test

Tests the second row (2R) left recline and center armrest console switches, motors, and sensors by measuring current draw, performing endpoint tests, and detecting communication with the Local Interconnect Network (LIN) bus.

TEST-SELF_VCLEFT_2R_P2-MS-RECLINE-ARMREST-CONSOLE

Model S / X (2021+)
Self-tests

Airwave - First Row Left Self-Test

Tests the functionality and connectivity of the first row left airwave actuators to the left vehicle controller (VCLEFT) ECU.

TEST-SELF_VCLEFT_X_AIRWAVE-FIRST-ROW-LEFT

Model S / X (2021+)
Service procedures

Calibrate Left FOOTWELL LED

The procedure calibrates the left footwell LED light controlled by the Left Vehicle Controller (VCLEFT). During calibration, the light may not illuminate.

PROC_VCLEFT_LEFT_CALIBRATE-FOOTWELL-LED

Model 3 / Y Model S / X (2021+)
Self-tests

Camera Heater B-Pillar Test

Executes a test to briefly turn on the b-pillar camera heater and verify it draws a minimum amount of current to confirm connectivity

TEST-SELF_VCLEFT_X_CAMERA-HEATER-B-PILLAR

Model 3 / Y Model S / X (2021+)