End EPBL Service Mode
Ends service mode on the left EPB
PROC_EPBL_STOP-SERVICE-MODE
Gen3/tasks/PING-TP_EPBL
Tests the communication of the Left Electronic Parking Brake (EPBL) Electronic Control Unit (ECU). Communication is established via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
When communication is established, the test will succeed. If the test fails, inspect wiring and ensure ECU is powered.
This task has no listed user inputs.
When communication is established, the test will succeed. If the test fails, inspect wiring and ensure ECU is powered.
This task has no listed user inputs.
When communication is established, the test will succeed. If the test fails, inspect wiring and ensure ECU is powered.
This task has no listed user inputs.
Ends service mode on the left EPB
PROC_EPBL_STOP-SERVICE-MODE
Resets the Left Electronic Parking Brake (EPBL) Electronic Control Unit (ECU). Reset is executed via Unified Diagnostics Services (UDS) over the Controller Area Network (CAN).
TEST-RESET_EPBL
Tests current of the front left seat controlled by the Left Electronic Parking Brake (EPBL) Electronic Control Unit (ECU).
TEST-SELF_EPBL_FRONT_SEAT-FAN
Clears current EPBL config and learns new config from gtw car configs. Only use after replacing EPB hardware where gtw config change was required.
PROC_EPBL_CLEAR-BRAKE-HW-TYPE