ModelX/tasks/TEST_BCFDM_FRONT-DRV_PRESENCE
This test checks for the presence of the driver door module at station FL-210 to ensure the connection to the door module is made correctly.
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
This task has no listed user inputs.
User initiated check for the interior mechanical door release. The mechanical release on the front door is a cable that is actuated when the interior door handle is pulled back fully. This test only applies to Model X vehicles equipped with LIN controlled cinching latches.
TEST_BCFDM_FRONT-DRV_DOOR-RELEASED
Read the calibration values of the front door actuator brake. Check Toolbox article #23251 for more details.
PROC_BCFDM_FRONT-DRV_READ-PFD-ACTUATOR-CAL
Write the calibration values of the front door actuator brake. If no values are specified, then default calibration values will be written. Check Toolbox article #23251 for more details. Note: CW = Clock Wise, used by RIGHT side door; CCW = Counter Clock Wise, used by LEFT side door.
PROC_BCFDM_FRONT-DRV_WRITE-PFD-ACTUATOR-CAL
The automated mirror folding routine actuates the mirror through its full range of motion while folding.
PROC_BCFDM_DRV_MIRROR-FOLDING-DR