Right Rear Door Speaker (Premium) Test
This tests the functionality of the Right Rear Door Speaker (Premium).
TEST-BASH_CID_REAR-R_SPEAKER-RRDO
Find the procedure. Understand what it does.
Explore diagnostic tests and repair tasks you can run with Tesware on compatible vehicles.
1,357
service tasks
Model 3, Y, S & X
1,357 tasks Showing 1033–1056
Browse by name, A–Z
This tests the functionality of the Right Rear Door Speaker (Premium).
TEST-BASH_CID_REAR-R_SPEAKER-RRDO
This tests the functionality of the Right Rear Lift Gate Speaker (Premium).
TEST-BASH_CID_REAR-R_SPEAKER-RRLG
Tests auto-addressing and communication of RGB lights controlled by the Right Vehicle Controller (VCRIGHT) Electronic Control Unit (ECU). Communication is established via the Local Interconnect Network (LIN) bus.
TEST-SELF_VCRIGHT_X_RGB-LIGHTS
Calibrates the front right seat track & motor.
PROC_VCRIGHT_SEAT-CALIBRATE
A consolidation of all the ODIN routines required to be run post replacing a right seat controller. The routine will wait for up to 30s for the second row right seat to be unoccupied.
PROC_VCSEAT2R_2R_POST-REPLACEMENT-PROCEDURE
Tests the right second row HVAC airwave vertical and lateral vent actuators. This routine detects whether each actuator is connected and calibrated. Each actuator's end- stop and zero-stop voltage and forward and reverse encoder values will be output.
TEST-SELF_VCLEFT_X_AIRWAVE-SECOND-ROW-RIGHT
Moves the right second row seat armrest to the downward endstop then a full range move to test the seat armrest, finally store the seat armrest as its nominal use position.
PROC_VCSEAT2R_X_2R-SEAT-ARMREST-FUNCTIONAL-TEST
Moves the right second row seat to the nominal use position, to the rearward endstop, and repeats another time to record speed history.
PROC_VCSEAT2R_R2-SEAT-ARMREST-HISTORY-GENERATION
Moves the right second row seat to the rearward endstop to perform position calibration, then move seat to the nominal use position.
PROC_VCSEAT2R_2R-SEAT-RECLINE-CALIBRATION
Moves the right second row seat to the rearward endstop to perform position calibration, then move seat to the nominal use position.
PROC_VCSEAT2R_R2-SEAT-CALIBRATION
Tests electrical connection of the right second row seat switchpack, buckle, occupancy, heatpad, fan, absolute position sensor, motor, and encoder.
TEST-SELF_VCSEAT2R_R2-SEAT
Moves the second row seat recliner/backrest to the rearward endstop to perform position calibration, then moves the backrest to the nominal use position.
PROC_VCRIGHT_X_2R-SEAT-RECLINE-CALIBRATION
Tests electrical connection of the second row seat adjustable recline sswitchpack, position sensor, motor, and encoder.
TEST-SELF_VCRIGHT_X_2R-SEAT-RECLINE-CONTROLS
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VCRIGHT_X_2R-SEAT-RECLINE-FUNCTIONAL-TEST
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VCSEAT2R_X_2R-SEAT-RECLINE-FUNCTIONAL-TEST
Moves the right second row seat track to the rearward endstop then a full range move to test the seat track, then move seat track to the nominal use position.
PROC_VCSEAT2R_X_2R-SEAT-TRACK-FUNCTIONAL-TEST
Executes a test to briefly turn on the right side and rear view mirror dimming (rear view only on Model X and Model Y Standard) and verify the voltage rail drops the minimum amount to confirm connectivity. Note this test only distinguishes between no mirrors connected and at least one connected.
TEST-SELF_VCRIGHT_X_MIRROR-DIM
Tests the connection to the right side repeater camera, and performs a camera firmware update.
PING-HTTP_DAS_R_REPEATER-CAMERA-SCRIPT
Tests the right side repeater off VCBATT2 on split front controller
TEST-SELF_VCBATT2_R_SIDE-REPEATER
Tests the connectivity of the right side repeater.
TEST-SELF_VCFRONT_R_SIDE-REPEATER
Check that the right signal light is working correctly.
TEST_VCFRONT_R_SIGNAL-LIGHT
Tests electrical connection of the third row seat adjustable recline switchpack, position sensor, motor, encoder, buckle, occupancy and heatpad.
TEST-SELF_VCRIGHT_X_3R-SEAT-6-SEATER
Moves the third row seat recliner/backrest to the rearward endstop to perform position calibration, then moves the backrest to the nominal use position.
PROC_VCRIGHT_X_3R-SEAT-RECLINE-CALIBRATION
Attempts to moves the second row seat recliner/backrest rearward, fold the seat, then unfold the seat to the nominal position.
PROC_VCRIGHT_X_3R-SEAT-RECLINE-FUNCTIONAL-TEST