BMS_f036 — SW HVIL
Full alert identifier: BMS_f036_SW_HVIL
Message shown in the car
Vehicle may not restart Service is required
Alert description
The battery management system (BMS) detects an issue with the high voltage interlock loop (HVIL). The voltage at the HVIL output pin of the BMS is too low (in respect to the number of HVIL nodes the vehicle has) or too close to the HVIL open voltage.
Potential impact
Inability to charge, drive, or support the low voltage (LV) system
Set condition
HVIL output voltage sensed by the BMS is outside of the expected bounds.
Clear condition
The BMS detects that the condition clears.
Signals to check
Open this alert in Service Mode Plus and review the Payload tab. Use the field names below to identify the values shown by your vehicle.
| Signal | Unit |
|---|---|
High Limit V
BMS_
|
V |
Hvil V
BMS_
|
V |
Low Limit V
BMS_
|
V |
| Signal | Unit |
|---|---|
Min HVIL Nodes Allowed
BMS_
|
— |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of BMS_f036.