Gen3/tasks/PROC_HVC_X_READ-WRITE-PACK-SERIAL-NUMBER
This routine provides the ability to read or write the HV battery serial number from/to the High Voltage Controller (HVC).
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
Entering an incorrect serial number will result in inaccurate displayed range values. Pack contactors will open and then close shortly after.
OPERATION · String
Select wether to read or write the HV battery serial number.
Default: READ
Options: READ, WRITE
SERIAL_NUMBER · String
Enter the HV battery serial number, if write operation selected.
Default: Not specified
Entering an incorrect serial number will result in inaccurate displayed range values. Pack contactors will open and then close shortly after.
OPERATION · String
Select wether to read or write the HV battery serial number.
Default: READ
Options: READ, WRITE
SERIAL_NUMBER · String
Enter the HV battery serial number, if write operation selected.
Default: Not specified
Entering an incorrect serial number will result in inaccurate displayed range values. Pack contactors will open and then close shortly after.
OPERATION · String
Select wether to read or write the HV battery serial number.
Default: READ
Options: READ, WRITE
SERIAL_NUMBER · String
Enter the HV battery serial number, if write operation selected.
Default: Not specified
Before running this routine, a Controller Area Network (CAN) Electronic Control Unit (ECU) redeploy needs to pass. After a High Voltage (HV) Battery replacement, this routine runs all required tasks.
PROC_HVC_X_PACK-REPLACEMENT
Clears the HVC battery coolant flood alert, BMS_a124_Battery_Coolant_Flood, if set. This routine shall only be executed after repairing the HV battery isolation issue.
PROC_HVC_X_CLEAR-BATTERY-COOLANT-FLOOD-ALERT
Clears the HVC internal isolation alert, BMS_a123_SW_Internal_Isolation, if set. This routine shall only be executed after repairing the HV battery isolation issue.
PROC_HVC_X_CLEAR-INTERNAL-ISOLATION-ALERT
Clears the High Voltage Controller (HVC) isolation counters and alerts BMS_a027_SW_Repeated_Isolation_Failure_In_Drive, BMS_a172_SW_Isolation_Failure_In_Drive_Warning, BMS_a123_SW_Internal_Isolation, and BMS_a124_Battery_Coolant_Flood, if set. This routine shall only be executed after repairing a HV system component for loss of isolation.
PROC_HVC_X_CLEAR-ISOLATION-CONDITION