ModelS/tasks/PROC_EAS_X_DEFLATE
Deflate an Electronic Air Suspension component. The EAS system can either deflate to the onboard reservoir or to the atmosphere. The routine can deflate to the reservoir or to ambient. If 'Ambient' is selected the system will release nitrogen to the atmosphere. A nitrogen tank is required to restore the air mass in the system after deflating to ambient. If 'Reservoir' is selected the system will deflate to the reservoir. Deflating to reservoir is unsupported in combination with targeted component "ALL". This network can also be run in two modes, "Complete" or "Timed". If 'Complete' is selected, the system will deflate the component completely. If 'Timed' is selected, the component will deflate for a short period of time.
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
If deflate to 'Ambient' is selected, the EAS system will release nitrogen to the atmosphere. The system will need to be filled with new nitrogen.
ActionTarget · String
Targeted Component
Default: FL
Options: FL, FR, RL, RR, ALL
ToReservoirOrAmbient · String
Deflate To Reservoir Or Ambient
Default: Reservoir
Options: Reservoir, Ambient
TimedOrCompleteDeflate · String
Deflate Mode
Default: Timed
Options: Timed, Complete
Check ride height calibration of the Continental air suspension. Please input the ride height measured at each corner of the vehicle.
PROC_EAS_X_CHECK-RIDE-HEIGHT-CALIBRATION
Exit service mode on Continental air suspension
PROC_EAS_X_FINISH-SERVICE
Levels the Continental Air Suspension to the selected target height. Low = 3, Standard = 4, High = 5, Very High = 6.
PROC_EAS_X_LEVEL-TO-HEIGHT
Calibrates the ride height of the Continental Air Suspension.
PROC_EAS_X_CALIBRATE-RIDE-HEIGHT