ModelS/tasks/PROC_EAS_X_FINISH-SERVICE
Exit service mode on Continental air suspension
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
This task has no listed user inputs.
Check ride height calibration of the Continental air suspension. Please input the ride height measured at each corner of the vehicle.
PROC_EAS_X_CHECK-RIDE-HEIGHT-CALIBRATION
Levels the Continental Air Suspension to the selected target height. Low = 3, Standard = 4, High = 5, Very High = 6.
PROC_EAS_X_LEVEL-TO-HEIGHT
Calibrates the ride height of the Continental Air Suspension.
PROC_EAS_X_CALIBRATE-RIDE-HEIGHT
Deflate an Electronic Air Suspension component. The EAS system can either deflate to the onboard reservoir or to the atmosphere. The routine can deflate to the reservoir or to ambient. If 'Ambient' is selected the system will release nitrogen to the atmosphere. A nitrogen tank is required to restore the air mass in the system after deflating to ambient. If 'Reservoir' is selected the system will deflate to the reservoir. Deflating to reservoir is unsupported in combination with targeted component "ALL". This network can also be run in two modes, "Complete" or "Timed". If 'Complete' is selected, the system will deflate the component completely. If 'Timed' is selected, the component will deflate for a short period of time.
PROC_EAS_X_DEFLATE