Service procedures
Model X Body Controller Front Passenger Module configuration routine
Configure Body Controller Front Passenger Module.
PROC_BCFPM_FRONT-PASS_SIDE-LEARN
Model S / X (legacy)
Front Passenger Door Calibration
ModelX/tasks/PROC_BCFPM_FRONT-PASS_POWER-DOOR-CALIBRATION-CHECK
What this task does
Performs a calibration check for the front passenger power door BCFPM ECU.
Vehicle compatibility
Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.
Model S / X (legacy) Legacy infotainment
- Vehicle coverage
- Pre-2021 Model X
- Supported connection
- Local connection
- Vehicle state
- Stationary · Parked
- Gateway diagnostic level
- Factory, Service
Task inputs (2)
uds_node
uds_node · String
Default: BCFPM
uncalibrated_warning
uncalibrated_warning · String
Default: BCFPM_w061_DoorBrakeUncalibrated
Related service tasks
Browse all tasks →
Diagnostic tests
Passenger Door
This test checks for the presence of the passenger door module at station FL-210 to ensure the connection to the door module is made correctly.
TEST_BCFPM_FRONT-PAS_PRESENCE
Model S / X (legacy)
Service procedures
Passenger Front Door - Read Actuator Brake Calibration
Read the calibration values of the front door actuator brake. Check Toolbox article #23251 for more details.
PROC_BCFPM_FRONT-PASS_READ-PFD-ACTUATOR-CAL
Model S / X (legacy)
Service procedures
Passenger Front Door - Write Actuator Brake Calibration
Write the calibration values of the front door actuator brake. If no values are specified, then default calibration values will be written. Check Toolbox article #23251 for more details. Note: CW = Clock Wise, used by RIGHT side door; CCW = Counter Clock Wise, used by LEFT side door.
PROC_BCFPM_FRONT-PASS_WRITE-PFD-ACTUATOR-CAL
Model S / X (legacy)