Skip to content

Passenger Front Door - Write Actuator Brake Calibration

ModelX/tasks/PROC_BCFPM_FRONT-PASS_WRITE-PFD-ACTUATOR-CAL

What this task does

Write the calibration values of the front door actuator brake. If no values are specified, then default calibration values will be written. Check Toolbox article #23251 for more details. Note: CW = Clock Wise, used by RIGHT side door; CCW = Counter Clock Wise, used by LEFT side door.

Vehicle compatibility

Select your vehicle’s hardware to see task details, requirements, and inputs. Availability is confirmed after connection.

Model S / X (legacy) Legacy infotainment
Vehicle coverage
Pre-2021 Model X
Supported connection
Local connection
Vehicle state
Stationary · Parked
Gateway diagnostic level
Factory, Service

Procedure notes

Changing brake calibration settings will impact the holding force of the door actuator.

Task inputs (4)

0 - CW Gain

0cw_gain · Float

Default: -7.45

1 - CW Offset

1cw_offset · Float

Default: 48.4

2 - CCW Gain

2ccw_gain · Float

Default: -7.9

3 - CCW Offset

3ccw_offset · Float

Default: 50.4

Browse all tasks →
Service procedures

Front Passenger Door Calibration

Performs a calibration check for the front passenger power door BCFPM ECU.

PROC_BCFPM_FRONT-PASS_POWER-DOOR-CALIBRATION-CHECK

Model S / X (legacy)
Diagnostic tests

Passenger Door

This test checks for the presence of the passenger door module at station FL-210 to ensure the connection to the door module is made correctly.

TEST_BCFPM_FRONT-PAS_PRESENCE

Model S / X (legacy)