CC_f008 — Input Under Voltage
Full alert identifier: CC_f008_inputUnderVoltage
Message shown in the car
Unable to charge - Input voltage too low Voltage must be within Wall Connector rating
Alert description
Alternating current (AC) root mean square (RMS) input voltage is too low.
Potential impact
Wall connector will not allow charging while the input voltage is too low.
Set condition
AC RMS input voltage fell below 160 V RMS for more than 2 seconds.
Clear condition
AC RMS input voltage rises above 170 V RMS for more than 2 seconds.
Signals to check
These diagnostic fields are associated with CC_f008. Check the alert's Payload in Service Mode Plus for available values.
| Signal | Unit |
|---|---|
Input Voltage
CC_
|
V |
Check other alerts
With Service Mode Plus enabled, open Service Alerts → All. Review the other alerts for clues to the cause of CC_f008.